Safety
Transportation
Sports and Fitness
Manufacturing
Graphics
- 1"x54" Aluminum Strip with Jessup Glo Brite® tamper-resistant, flexible, photoluminescent safety grade tape.
- Coated with a high performance, permanent acrylic adhesive that has been designed to exceed requirements for emergency egress and other safety standards in lower lighting conditions.
- It is designed for indoor safety applications such as leading edge, stairs, perimeter demarcation and hazard marking areas that are to remain permanently adhered to the surface.
- Meets UL 1994
- Meets New York City Construction Code (2009/2012/2015/2018 IBC/IFC)
- Printed with: Jessup / 7650-AS1-1 UL Listed UL 1994
$23.63
| Series Name | Glo Brite® Safety Grade |
|---|---|
| Certifications | DIN 67510, ASTM 2072, ISO 15370, IMO RES A. 752 (18), EU marine Equipment Directive, PSPA class C, JIS Z9100, IBC, IFC, UL 1994 Listed |
| Oil & Chemical Resistant | No |
| Recyclable | No |
| Repositionable | No |
| Brand | Glo Brite® |
| Disable NFSI Compliance | No |
1"x54" Aluminum Strip with Jessup Glo Brite® tamper-resistant, flexible, photoluminescent safety grade tape. Coated with a high performance, permanent acrylic adhesive that has been designed to exceed requirements for emergency egress and other safety standards in lower lighting conditions. It is designed for indoor safety applications such as leading edge, stairs, perimeter demarcation and hazard marking areas that are to remain permanently adhered to the surface. Meets UL 1994 and New York City Construction Code.
Write Your Own Review
Applications & Markets
-
Emergency Exits
-
Egress Path Marking
-
Low Location Lighting
-
Fire Safety
-
Building Safety
-
Floor Identification
-
Door Marker
-
Manufacturing
-
Safety
-
Retail
-
Architecture and Construction
-
Hospitality and Healthcare
-
Government and Education
CUSTOMERS WHO BOUGHT THIS ALSO BOUGHT
Check items to add to the cart or
More Resources
-
Glo Brite® FilmsBrochure highlighting Glo Brite® photoluminescent rolls and sheets. -
Safety Data SheetThe Safety Data Sheet (SDS) addresses any material hazards relative to worker health and environment. -
Regulatory Data SheetThe Regulatory Data Sheet (RDS) addresses material components relative to regulated substances. -
UL AuthorizationNotifice of completion and authorization to apply the UL 1994 mark for specified Jessup® products. -
CertificatesThis is a Certificate of Fire Approval for Glo Brite® 7500 & 7600 series products, issued by Lyod’s Register, in accordance with IMO Resolution A.752(18). -
CertificatesThis document outlines the directive from Lloyds Register of the certificate of conformity. -
CertificatesCertificate issued by Lloyd's Register for 7500 Series Glo Brite® and 7600 Series Glo Brite® (Limited between 7615 and 7650) specific to the standard IMO Resolution A.752(18). -
CertificatesEC Type Examination (Module B) Certificate
This is to certify that Lloyd's Register Verfication B.V. (LRV B.V.), designated as a "notified body" under the Ministry of Infrastructure and the Environment-Netherlands Shipping Inspectorate (ILT Scheepvart) notification, did undertake the relevant type approval procedures for the type of equipment identified below which was found to be in compliance with the requirements of Marine Equipment Directive (MED) 2014/90/EU, subject to any conditions in the Design Appraisal document attached hereto.
Regulation Item (No. & Item Designation): MED/3.40 Low-Location Lighting Systems (Components Only)
-
CertificatesThis is a certificate of compliance for egress path markings. -
International Standards Compliance ChartThis is an international standards compliance chart featuring the Glo Brite® products. -
Luminance ChartsThis chart compares the luminance values of the photoluminescent films. -
EgressThis is a selection guide for egress components.