Egress Codes for US Commercial Buildings

photoluminescent exit lightsThis blog intends to cover the basic principles of egress codes as it applies to commercial buildings found in the United States. The basic concept of egress codes centers on one fundamental mission, and that mission involves developing a proper means of egress, otherwise known as a safe method of evacuation a premises. The means of egress must be a continuous path that is completely unobstructed at any point, from the starting point of the egress path all the way, until the evacuees reach the outside safety location. Egress codes for US commercial buildings also include the proper measurements and design specifics of doors, the width of rooms and hallways, the type of lighting and marking founds throughout the building, even the geometry of the stairwells and which direction doors can swing open and closed. The egress code will also include a supplemental, or auxiliary pathway in the event that the primary pathway becomes blocked.

The means of egress that is described in the coding language for US commercial buildings is divided into three parts: the exit access, the exit, and the exit discharge. The exit access lists the types of rooms or locations, which the occupant must travel through to reach safety. The exit lists the types of doors and stairs a person might have to navigate in order to reach safety. The exit discharge is the description of the door that leads directly to the outside. The egress codes will thoroughly articulate to US commercial buildings exactly what is demanded to meet regulation and protocol in order to be considered within the necessary guidelines. Though the egress codes will likely seem quite elaborate, bordering on tedium, there is a reason these codes are so strict: it is believed that these very specific egress codes for US commercial buildings will save lives in the vent of a catastrophe that leads to people having to evacuate a building or large structure.

As it pertains to the exit discharge, additional information will be included in the egress codes regarding the outside location named the minimum safe distance range. Though it is outside, the safe location must be totally out of harms away from whatever is affecting the building. All occupants must be protected in this outside location, no matter how many people evacuated to that specific area. In other words, the outside spot cannot merely be a small outdoor area just a few feet away from the exit discharge; it needs to be a large, open area that pours out and away from the building under siege from a fire or other hazard.

A lot more information is covered in the egress codes for US commercial buildings, and GloBrite Systems can help you with the rest. It is advised that, if you are the owner of a commercial building, that you contact GloBrite, where a representative of the company can help you fully understand that the egress codes that apply to your building call for, as well as help you become one hundred percent compliant and free from potential levied fines. Let GloBrite help you with the language in the egress codes for your building, so your building can be deemed safe for all occupants.

No Comments Yet.

Leave a comment