According to the National Fire Protection Association, a structure must be over seventy-five feet tall to qualify as a high rise. A quick fire safety exit is harder to achieve due to the design of these buildings. Set standards require appropriate measurements to be in place for increasing the safety of occupants. Each exit must be marked to allow visibility during emergencies. An alarm system, standby lighting, sprinkler systems, and communication methods are all required for high rise fire safety. These standards apply to both commercial and residential buildings.
The listed systems may be reliable, though do not always perform accordingly when needed the most. Egress path markings, along with additional signing, are code requirements to ensure exits can be identified. Your building may have the necessary items in place, but are capable of failing even when tested and maintained at regular intervals. Luminous signing is one method for ensuring path identification in the worst emergency conditions.
Using Self Luminous Safety Signs to Outline Planned Exit Routes
Installing self luminous safety signs is an emergency measure you can implement to provide increased exit visibility. Lack of maintenance and power requirements make these identification methods affordable. Visibility is not decreased by heavy smoke or loss of lighting. These safety products can be seen under any circumstances. These measures make the products highly effective whenever a situation requiring evacuation takes place.
By installing luminous identifiers throughout your building, you are guaranteeing the safe exit of all people occupying the edifice. Generators or other power sources can fail to operate during these situations, making it important to have secondary measures in place.
Once self luminous safety signs and materials have been installed, occupants need to be informed about proper evacuation procedures. High rise buildings come with additional evacuation challenges. Advanced preparation allows for a quicker exit from the highest floors and will saves lives.
Egress paths should be checked regularly to avoid locked areas or blockages. Test backup systems accordingly to reduce the chances of failure. A well-conceived evacuation strategy needs to be in place and practiced by everyone residing in the building. Markings and signs help those who are unfamiliar with the structure or plan and prevent panic by keeping occupants focused on where to go. Accommodations should be in place to suit individuals unable to use designated exit paths.
Occupants need to be informed of not only what to do, but also what to expect in the event of an emergency. In residential structures, the alarms should be recognizable by all individuals. Commercial facilities might need a communication system installed to relay instructions. Put a plan in place for notifying emergency personnel of problem that might occur.
Every occupant must know where exits are located, be aware of multiple egress routes, and be familiar with the building layout. Post the structure’s blueprints on every floor so egress paths can be better identified. Use luminous materials to direct people to the nearest exit.
Glo-Brite offers many luminescent supplies for properly marking egress routes within a building. Taking the right precautionary steps for high rise fire safety will ensure all occupants reach the appropriate destination in a calm and quick manner.